Wall Systems

  • All
  • CI Finish Systems
  • Insulated Stucco
  • Lightcore Limestone Panels
  • Manufactured Stone
  • Natural Thin Stone
  • Nichiha
  • Thin Brick

All

WaterMaster CI

Standard WaterMaster CI is a drainage CI system. This system offers energy efficiency, light weight, versatile design, and economical installation. This system is superior in that the water-resistive barrier is fluid. This fluid applied water-resistive barrier also acts as an air barrier allowing for climate control systems to operate more efficiently. Drainage is achieved through vertical ribbons of adhesive providing a larger drainage plane for incidental moisture.

WaterMaster XPS

Standard WaterMaster XPS is our premium drainage EIF system. Like Standard EIFS, this system also offers the base level of benefits available in EIFS; energy efficiency, light weight, versatile design, and economical installation.

WaterMaster KS

Armourwall 300 WaterMasterKrack Shield

Provides the durable benefits and aesthetic beauty of stucco and comes with WeatherSeal, a liquid applied water resistive barrier and air barrier, Acrylic Base Coat and Reinforcing mesh for crack resistance and added drainage capabilities. The use of WeatherSeal as the liquid applied water resistive barrier is superior to paper based water-resistive barriers because there are no issues with rips or tears in the paper thus providing a continuous layer of moisture protection. Furthermore, the liquid applied water-resistive barrier in Armourwall 300 WaterMaster act as an air barrier as well. This allows a structures climate control systems to operate more efficiently and saves the building owner money. Armourwall 300 WaterMaster is an exceptional upgrade to any structure.

WaterMaster KS CI

Armourwall 300 WaterMaster CI

Provides the durable benefits of WeatherSeal, a liquid applied water resistive barrier and air barrier. The use of WeatherSeal as the liquid applied water resistive and air barrier is superior to paper based water-resistive barriers because there are no issues with rips or tears in the paper thus providing a continuous layer of moisture protection. This allows a structures climate control systems to operate more efficiently and saves the building owner money. The combination of the air barrier and continuous insulation on this CI assembly provides the ultimate in energy efficiency for a stucco system. An additional layer of crack resistance is obtained by applying a fiberglass reinforcing mesh and base coat below the finish coat.

Over WB – Framing

NO CI

Nichiha panels PROVIDE the durability of fiber cement and the aesthetic of your favorite building material at a fraction of the cost. Textures including metal, wood, block, stone and brick, in a full range of colors and finishes with trim to match.

Over WB + Grid Work + CI

CI with ISOCLIP

Nichiha panels PROVIDE the durability of fiber cement and the aesthetic of your favorite building material at a fraction of the cost. Textures including metal, wood, block, stone and brick, in a full range of colors and finishes with trim to match.

Over Weather Barrier – Framing

ILCO WINDOW HEAD NO CI

By bonding a veneer of distinctive natural stone to an advanced honeycomb backing, our LiteCore Lightweight Natural Stone Panel System opens new possibilities for building, engineering and architecture. Weighs less than 4# per sq ft and reduces structure requirements.

Over WB + Grid Work + CI

ILCO WINDOW HEAD CI + ISOCLIP

By bonding a veneer of distinctive natural stone to an advanced honeycomb backing, our LiteCore Lightweight Natural Stone Panel System opens new possibilities for building, engineering and architecture. Weighs less than 4# per sq ft and reduces structure requirements. ISOCLIP, and Durasheath keep you NFPA 285 compliant while retaining the insulation value as designed.

Over Plaster

MVS-STD

Parex USA Masonry Veneer System over Stucco (MVS-Standard) combines the aesthetics of Thin Brick with the durability of stucco assemblies. MVS STD comes with a liquid applied water and air barrier and carries a 15 year warranty against delamination as well as moisture penetration through the assembly.

Over Plaster CI

Thin Brick over MVS-CI

Masonry Veneer over CI combines the aethestics of tile, brick and stone with the performance of Continuous Insulation. Masonry Veneer over CI can wrap almost any structure in a blanket of insulation. This allows building owners to obtain the look and feel they desire yet enjoy the operating benefits of low energy costs. Whether the project is new construction or the renovation of an existing building the design and energy benefits of CI make this cladding an ideal solution.

Over CI

MVS-CI

Thin Brick is bonded to the Parex USA Reinforced cementitious base coat and mechanical fasteners over a continuous insulation. The EPS continuous insulation is adhered with vertical ribbons of adhesive to create drainage over a water resistive barrier coating. This assembly has passed NFPA 285, NFPA 268, as well as Structural and Shear Bond Testing. This assembly carries a 15 year warranty against delamination of the veneer and moisture penetration through the assembly.

Over Plaster

Natural Stone over Plaster

Parex USA Masonry Veneer System over Stucco (MVS-Standard) combines the aesthetics of Natural Thin Stone with the durability of stucco assemblies. MVS STD comes with a liquid applied water and air barrier and carries a 15 year warranty against delamination as well as moisture penetration through the assembly.

Over Plaster / CI

MVS-STD with CI

Parex USA Masonry Veneer System over Stucco (MVS-Standard) combines the aesthetics of tile, brick and stone with the durability of stucco assemblies. A polymer modified stucco base coat and fluid applied weather barriers enhance the long term durability of these systems

Over CI

Natural Stone over MVS-CI

Natural Stone Veneer is bonded to the Parex USA Reinforced cementitious base coat and mechanical fasteners over a continuous insulation. The EPS continuous insulation is adhered with vertical ribbons of adhesive to create drainage over a water resistive barrier coating. This assembly has passed NFPA 285, NFPA 268, as well as Structural and Shear Bond Testing. This assembly carries a 15 year warranty against delamination of the veneer and moisture penetration through the assembly.

Over Plaster

MVS-STD

Parex USA Masonry Veneer System over Stucco (MVS-Standard) combines the aesthetics of Manufactured Stone with the durability of stucco assemblies. MVS STD comes with a liquid applied water and air barrier and carries a 15 year warranty against delamination as well as moisture penetration through the assembly.

Over Plaster / CI

MVS-STD with CI

Parex USA Masonry Veneer System over Stucco (MVS-Standard) combines the aesthetics of Natural Thin Stone with the durability of stucco assemblies. MVS STD comes with a liquid applied water and air barrier, Continuous Insulation, and carries a 15 year warranty against delamination as well as moisture penetration through the assembly.

Over CI

MVS-CI

Manufactured Stone Veneer is bonded to the Parex USA Reinforced cementitious base coat and mechanical fasteners over a continuous insulation. The EPS continuous insulation is adhered with vertical ribbons of adhesive to create drainage over a water resistive barrier coating. This assembly has passed NFPA 285, NFPA 268, as well as Structural and Shear Bond Testing. This assembly carries a 15 year warranty against delamination of the veneer and moisture penetration through the assembly.